Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the sun visor in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

In this tutorial we can see how to replace the sun visors in the Ford Fiesta, an extremely simple and fast operation. First of all, go inside the cabin on the side where you will be working, then open the visor in question, locate the two screws on the outer base of it and unscrew them using a simple cross-tip screwdriver. Then grab the visor, pull it towards you and unhook it from the roof. To install the replacement, simply follow the reverse procedure. Finally, repeat the operation on the opposite side, if necessary.

Posted on 28 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Sun Visor on Ford Fiesta
Removing Sun Visor on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the sun visor on your Fiesta damaged? Here’s how to remove it from inside the cabin. Unlock the sun visor and move it to the right or left of the …
Replacing the air conditioning fuse on the Ford Fiesta
Replacing the air conditioning fuse on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If the air conditioning in your Ford Fiesta is not functioning, and the coolant temperature rises excessively while the climate fan does not operate,…
Location of the Fuse Boxes in the Ford Fiesta
Location of the Fuse Boxes in the Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) If you need to work on the electrical system and components of the Ford Fiesta, it will be useful to know the location of the fuse boxes in case one …

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos