Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Tail light

In this video tutorial, you will see how to remove the rear headlight of a Ford Escape, model years 2013 to 2016. Start by opening the trunk and locating the two screws that hold the headlight in place. Remove the two screw covers with a small flathead screwdriver and proceed to unscrew them with a 8mm socket wrench. Now you can pull the headlight towards you. Once this is done, you can replace the bulbs or the headlight itself. If it is difficult to remove, you can use tape as shown in the video to increase the contact surface and improve your grip.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight on a Ford Escape?
How to Remove the Rear Headlight on a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this video, you can see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace a b…
How to Replace the Rear Headlight on a Ford Escape?
How to Replace the Rear Headlight on a Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial, you will see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace…
How to Replace the Rear Light Bulb in the Ford Escape
How to Replace the Rear Light Bulb in the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the rear light bulb in the Ford Escape, open the trunk lid to access the screws on the side of the light. By removing the cover caps and l…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos