Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

See other generations:
Video tutorial

Before you start, open the bonnet of your Ford Focus. Begin by removing the upper engine cover by simply pulling it towards you. This will expose the diesel filter.

Next, unscrew and remove the bolts securing the metal cover of the filter, then remove the cover itself. After that, disconnect the two hoses and the connector by simply pulling.

At this point, you can remove the entire filter block. Unscrew the top part of the block to access the filter.

Once you reach the diesel filter, remove it from the block, and you will have completed the disassembly. To install the new filter and close everything up, follow these steps in reverse, and you will have successfully completed the replacement.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Diesel Filter from a Ford Focus
How to Remove the Diesel Filter from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts…
How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
Ford Focus (2011-2018 / MK 3) This guide briefly explains the steps to remove and replace the fuel filter on a Ford Focus 1.5 TDCI. First, open the engine bonnet and locate the fu…
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Replacing the Diesel Filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show you how to remove and replace the diesel filter of the Ford Focus 1.6 TDCi. First, open the bonnet of the vehicle and b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos