Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wheel Replacement on Ford Ka - Fiat 500

Model: Ford Ka MK 2 - Years 2008-2016
Part: Wheel

In this video tutorial, you will learn how to remove and replace the wheel on a Ford Ka, as well as on a Fiat 500. First, take out the spare wheel or space-saver, the jack, and the wheel nut spanner from the boot; then, loosen the wheel nuts. Next, lift the vehicle by positioning the jack at the designated jacking point and completely unscrew the nuts to remove the wheel; simply replace it with the spare and reassemble everything, as shown in the video. Finally, reposition all items and the punctured wheel in the boot!

Updated on 4 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Rear Bumper on Ford Ka
Removing the Rear Bumper on Ford Ka
Ford Ka (2008-2016 / MK 2) .. the Ford Ka is very similar to that fitted on the Fiat 500, so this tutorial will be useful for drivers of both cars. It is secured to the rest of the.. …
How and When to Replace the Timing Belt on a Ford Ka 1.2
How and When to Replace the Timing Belt on a Ford Ka 1.2
Ford Ka (2008-2016 / MK 2) .. Ford Ka with a 1.2 engine, as well as on the Fiat 500 and Fiat Panda; the timing belt on these engines is generally changed between 50,000 and 62,000.. …
How to Replace the Wheel with the Spare on a Ford KA
How to Replace the Wheel with the Spare on a Ford KA
Ford Ka (1996-2008 / MK 1) In this video tutorial, learn how to remove and replace the wheel with the spare on a Ford KA. First, open the rear hatch of the boot and start takin…

    Frequently Asked Questions

    • Ka 2008-2016 - Where is the spare wheel on the Ford Ka? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos