Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuse Boxes on the Ford B-Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Fuse box

This guide shows the location of the fuse boxes on the Ford B-Max, produced from 2012 to 2017. The first box is located inside the glove compartment; when you open the drawer, the box is behind the panel. Inside are the fuses that protect the electrical systems in the cabin. The second box is located in the engine compartment, in the right corner under the windscreen; this box manages the control of the electrical systems in the engine compartment. The user manual contains a section regarding the fuse guide.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box Diagram and Location for the Ford B-Max
Fuse Box Diagram and Location for the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today, we will look at the instructions that will allow us to access the fuse boxes of the Ford B-Max, obtaining the diagram and layout. First, open …
How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
Resetting the maintenance light on a Ford B-Max
Resetting the maintenance light on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Let's see in a few simple steps how to reset the maintenance light for the engine oil change on a Ford B-Max. First, get in the vehicle and turn the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos