Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Windshield wipers

To replace the windshield wiper blades on a Ford F-250, you need to release the pin that connects the blade to its arm using a thin object like a screwdriver. Once the pin is opened, you can slide the blade off the hooked end at the end of the arm. This way, you can position the new blade at the end of the arm and secure it by lowering the pin. After the blade is inserted at the end of the arm, position it on the windshield and check that it works correctly.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator in the Ford F-250?
How to Replace the Alternator in the Ford F-250?
Ford F-250 (2008-2010 / P356) To replace the alternator in the Ford F-250, open the hood to access the components inside the engine bay. Disconnect the terminals connected to the …
How to Replace the Rear Headlight in a Ford F-250
How to Replace the Rear Headlight in a Ford F-250
Ford F-250 (2017-2022 / P558) To replace the rear headlight in a Ford F-250, lower the tailgate to access the side screws securing the headlight. Loosen these screws to extract th…
How to Replace the Radio in a Ford F-250
How to Replace the Radio in a Ford F-250
Ford F-250 (1999-2007 / Phn131) Follow this brief and simple guide to remove and replace the factory radio in your Ford F-250. First, get inside the vehicle and start by removing th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos