Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Outside Rearview Mirror on a Ford F-150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Side mirror

In this short and simple guide, see how to remove and replace the outside rearview mirror on the Ford F-150. First, open the front door and start by removing the triangular plastic cover located behind the rearview mirror, prying it off with something thin. Then, disconnect the electrical connector for the mirror adjustment and use a socket wrench to remove the mirror nuts, as shown in the video. At this point, pull the mirror out from the outside along with the cable, replacing it with the new one!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb in the Ford F-150 side mirror
Replacement of the turn signal bulb in the Ford F-150 side mirror
Ford F-150 (2015-2020 / MK 13) Today we will discover the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the For…
How to Replace the Mirror and Motor of the Outside Rearview Mirror on the Ford F-150
How to Replace the Mirror and Motor of the Outside Rearview Mirror on the Ford F-150
Ford F-150 (2009-2014 / MK 12) If you need to replace the mirror of the electric outside rearview mirror and its motor on this vehicle, you will find the necessary instructions and…
How to Replace the Outside Rearview Mirror on a Ford F-150?
How to Replace the Outside Rearview Mirror on a Ford F-150?
Ford F-150 (2009-2014 / MK 12) To replace the outside rearview mirror on a Ford F-150, remove the door panel corresponding to the mirror you need to replace. Detach the panel by un…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos