Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Outside Rearview Mirror on a Ford F-150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Side mirror

In this brief guide, you will learn how to remove and replace the outside rearview mirror on a Ford F-150 by following these simple steps. First, open the front door and start by removing the plastic cover located behind the outside rearview mirror; then unscrew the mounting screws to slide the mirror out from the exterior, as shown in the video. At this point, replace and install the new rearview mirror, securing it properly and finally adjusting the mirror glass!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Outside Rearview Mirror on a Ford F-150
Replacing the Outside Rearview Mirror on a Ford F-150
Ford F-150 (2015-2020 / MK 13) In this short and simple guide, see how to remove and replace the outside rearview mirror on the Ford F-150. First, open the front door and start by …
How to Replace the Outside Rearview Mirror on a Ford F-150?
How to Replace the Outside Rearview Mirror on a Ford F-150?
Ford F-150 (2004-2008 / MK 11) To replace the door panel on a Ford F-150, first remove the door panel by unscrewing the appropriate bolts located at the bottom of the panel, near t…
Replacement of the turn signal bulb in the Ford F-150 side mirror
Replacement of the turn signal bulb in the Ford F-150 side mirror
Ford F-150 (2015-2020 / MK 13) Today we will discover the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the For…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos