Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Ford Escape front bumper grille

Model: Ford Escape MK 2 - Years 2008-2012
Part: Grille

Let's find out in this short and simple guide the procedure necessary to remove and replace the front bumper grille of the Ford Escape. First of all we open the bonnet and start by removing the plastic caps that we find above the grille; we use a 10 mm socket wrench to unscrew the screws that we find below. At this point we are going to remove the clips that we find on both sides of the wheel arches; then we use a 10 mm wrench to unscrew the plastic screws. Now let's remove the front bumper and replace the grille with the new one!

Posted on 5 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the front bumper of the Ford Escape?
How do you remove the front bumper of the Ford Escape?
Ford Escape (2008-2012 / MK 2) In order to remove the front bumper of the Ford Escape it will be necessary to open the hood so that the bolts that secure it from the top can be uns…
Disassembly of the front bumper of the Ford Escape
Disassembly of the front bumper of the Ford Escape
Ford Escape (2013-2019 / MK 3) Shortly we will see the instructions that will allow us to disassemble and replace the front bumper of the Ford Escape, in simple steps. First, we op…
How to remove the windshield washer fluid reservoir of the Ford Escape.
How to remove the windshield washer fluid reservoir of the Ford Escape.
Ford Escape (2001-2007 / MK 1) Today we will see the procedure that will allow us to disassemble and replace the windshield washer reservoir of the Ford Escape. First, we open the …

Other guides you may be interested in

How to Fit Seat Covers on a Renault Clio

How do you fit seat covers on your Renault Clio? Watch this video for guidance. First, move the seat forward and raise the seat base, then remove the headrest from the backrest. Slide the seat cover from the top down over the backrest, removing any controls on the side of the seat if necessary by pulling them towards you. After fitting the upper seat cover, ensure it is around the headrest seals. Fit the lower seat cover on the base, pull the springs with the metal clips and secure them. Use plastic spatulas to assist with the fastening.

Watch the video!


by ScegliAuto

More videos