Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from the Ford Transit Dashboard

Model: Ford Transit MK 8 - Years 2014-2024
Part: Instrument cluster

In this video tutorial, you will learn how to remove the instrument cluster from the dashboard of a Ford Transit, following the instructions below. First, get inside the vehicle and start by removing the plastic cover above the instrument cluster on the dashboard; then remove the plastic bezel around the cluster and unscrew its retaining screws using a socket spanner. At this point, disconnect the electrical connectors at the back to completely remove the instrument cluster, and finally reassemble everything!

Updated on 8 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Dashboard Instrument Cluster Lights in the Ford Transit
Replacing the Dashboard Instrument Cluster Lights in the Ford Transit
Ford Transit (1986-1994 / MK 4) In this guide, discover how to remove and replace the bulbs in the dashboard instrument cluster of the Ford Transit. First, get into the vehicle and …
Replacing the Instrument Cluster on Ford Transit
Replacing the Instrument Cluster on Ford Transit
Ford Transit (2000-2006 / MK 6) Do you want to remove the instrument cluster from the Ford Transit? Remove some plastics to facilitate the disassembly of the instrument cluster. Use…
Removing the Instrument Cluster from a Ford Transit
Removing the Instrument Cluster from a Ford Transit
Ford Transit (2014-2024 / MK 8) In this video tutorial, you will see the procedure for removing and replacing the instrument cluster on a Ford Transit. First, get in the vehicle and…

Other guides you may be interested in

    Frequently Asked Questions

    • Transit 2006-2014 - How to restore the service on the Ford Transit? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos