Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Service warning light

To reset the Service light on a Ford Fiesta, press the brake and accelerator pedals simultaneously. While holding the pedals down, turn on the ignition. Once the ignition is on, keep the pedals pressed for about fifteen seconds. When the light turns off, you can release the brake and accelerator pedals, then turn off the ignition to complete the reset procedure. When you turn the ignition back on, the Service light will be correctly reset until the next maintenance interval.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The service light on a Ford Fiesta can be reset from the instrument cluster by pressing the brake and accelerator pedals simultaneously. While holdin…
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tyre pressure warning light on the Ford Fiesta, turn on the ignition and navigate through the display using the controls on the right si…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To reset the Service light on a Ford Fiesta, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, press and ho…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos