Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Ford Transit

Model: Ford Transit MK 6 - Years 2000-2006
Part: Tail light bulb

In this tutorial, you will learn how to remove and replace the rear light bulbs and the entire rear lamp on a Ford Transit. First, open the rear doors and start by unscrewing the plastic screws located behind the rear lights; then gently remove the rear lamp by prying at the sides and disconnecting the electrical connector of the bulbs, as shown in the video. At this point, remove the bulb holder from the light cluster, gaining access to the bulbs; replace them with new ones and then reassemble the rear light unit!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today, we will discover the instructions to remove and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and st…
Replacement of the rear headlight bulbs of the Ford Transit Custom
Replacement of the rear headlight bulbs of the Ford Transit Custom
Ford Transit (2014-2024 / MK 8) Following these short and simple steps, we will see how to disassemble and replace the rear headlight bulbs of the Ford Transit Custom. First, open t…
How to Replace the Rear Headlamp Bulbs on a Ford Transit Van?
How to Replace the Rear Headlamp Bulbs on a Ford Transit Van?
Ford Transit (2006-2014 / MK 7) In this tutorial, see how to remove the rear headlamp and replace the bulbs on a Ford Transit van. For this simple and quick operation, you won't nee…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos