Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Timing belt

Today, we will see how to replace the auxiliary belt on the Ford Focus. Open the front bonnet by pulling the internal lever, then lift the vehicle on a ramp. Locate the bolt to loosen and act on it. Now the timing belt will be loosened from the pulley, allowing you to remove it easily. Install the new belt (available at all online and physical spare parts shops), ensuring it is tensioned correctly. Once done, check the accuracy of the work and lower the car from the ramp. Let it run and verify everything is okay.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Replacement of the timing belt of the Ford Focus 1.6 Ti-VCT
Replacement of the timing belt of the Ford Focus 1.6 Ti-VCT
Ford Focus (2004-2011 / MK 2, Focus 2) Once a certain mileage is reached, it will be necessary to disassemble and replace the timing belt; let's see the procedure on the Ford Focus 1.6 Ti-…
Replacing the Crankshaft Pulley and Timing Belt on the Ford Focus 1.6
Replacing the Crankshaft Pulley and Timing Belt on the Ford Focus 1.6
Ford Focus (2004-2011 / MK 2, Focus 2) Today, follow the main instructions for removing and replacing the timing belt and crankshaft pulley on the Ford Focus 1.6. First, raise the vehicle …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos