Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How to reset the Ford Kuga service?

Ford Kuga - Video tutorial

Model: Ford Kuga MK 2, C520 - Years 2012-2019
Part: -board computer
Operation: How to reset the Ford Kuga service?

In today's tutorial you will find out how to reset the expired service notice in the second series of the Ford Kuga; this video is valid for other contemporary models of the group such as, for example, the Focus or the Mondeo. Once inside the vehicle we can proceed with the operation. We fully press the accelerator and brake pedals and at the same time turn on the ignition of the car. After about 30 seconds the procedure will be finished; you will find out from the message on the car's on-board computer. Now, the next time you restart your Ford, you will see that the annoying message will be gone and you can continue.


Posted on 18 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the orange engine light mean in the Ford Kuga? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos