Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Rear Spoiler on the Ford Escape [USA]

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

Start by cleaning the surface of the body where the spoiler will be mounted with a degreaser. Take the spoiler and position it before securing it to verify the correct placement, then place tape on the body corresponding to the outline of the spoiler.

Take double-sided tape and apply it along the entire outer edge of the spoiler, removing only the protective film from the right and left corners of the spoiler and securing the ends of the tape to the outside of the spoiler. Take a cartridge of silicone and apply it to the flat inner surface of the spoiler.

Finally, position the spoiler on the body using the tape as a reference for placement, then gently pull off the protective film from the entire strip of double-sided tape. At that point, the spoiler will be properly mounted.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Removing the Rear Hatch Panel of the Ford Escape
Removing the Rear Hatch Panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In today's tutorial video, you will learn how to remove and replace the rear hatch panel of the Ford Escape in simple and quick steps. First, open th…
How to Replace the Rear Wiper on the Ford Escape?
How to Replace the Rear Wiper on the Ford Escape?
Ford Escape (2013-2019 / MK 3) To replace the rear wiper on the Ford Escape, lift the corresponding arm so that the blade is no longer in contact with the glass. Once lifted, locat…
How to Remove and Replace the Rear Hatch of the Ford Escape
How to Remove and Replace the Rear Hatch of the Ford Escape
Ford Escape (2001-2007 / MK 1) Today's guide shows you the main steps to remove and replace the rear hatch of the Ford Escape. First, open the trunk hatch and start by removing the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos