Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Hatch Panel of the Ford Escape

Model: Ford Escape MK 2 - Years 2008-2012
Part: Door trim panel

In today's tutorial video, you will learn how to remove and replace the rear hatch panel of the Ford Escape in simple and quick steps. First, open the trunk hatch and start by removing the screws on the sides using a Phillips screwdriver; then, pry off the door trim to detach and completely remove it. At this point, proceed to reinstall the hatch panel, securing it properly on the sides and along the rear window ledge, following the tutorial video until the end!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Hatch Panel on a Ford Escape
How to Remove the Rear Hatch Panel on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today, you will learn how to remove and replace the rear hatch panel on a Ford Escape. First, open the trunk and start removing the plastic trim piec…
How to Remove and Replace the Rear Hatch of the Ford Escape
How to Remove and Replace the Rear Hatch of the Ford Escape
Ford Escape (2001-2007 / MK 1) Today's guide shows you the main steps to remove and replace the rear hatch of the Ford Escape. First, open the trunk hatch and start by removing the…
How to open the rear hatch of the Ford Escape from the inside.
How to open the rear hatch of the Ford Escape from the inside.
Ford Escape (2013-2019 / MK 3) In this guide, we will see the instructions that will allow us to open the rear hatch of the Ford Escape from the inside, thus unlocking the closure.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos