Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel on the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Door trim panel

The removal of the door panel of a 2018 Ford Escape is a very simple operation to perform independently. Let's start the disassembly of the panel by removing the central handle with a flat tip screwdriver. Unscrew the screws inside it and then remove the window switch panel in order to disconnect the first connector. Continue with the removal of the central screws, the opening handle and the side screws. Finish by removing the panel and disconnecting the central connector. To reassemble the panel, you will need to follow the same procedure but in reverse.

Posted on 13 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see the instructions that will allow us to disassemble and remove the front door panel of the Ford Escape, as well as the Kuga. First, …
How to disassemble the front door panel of the Ford Escape
How to disassemble the front door panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide we will see the instructions that will allow us to disassemble the front door panel of the Ford Escape, in simple steps. First, we open…
How to remove the front door panel of the Ford Escape
How to remove the front door panel of the Ford Escape
Ford Escape (2001-2007 / MK 1) In this short guide, we will see the process of disassembling the door panel of the Ford Escape, in simple and quick steps. First, we open the front …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos