Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Engine oil

In this new mini guide, you will learn how to change the engine oil in the 2013 Ford C-Max. Although it may seem like a complex task, it is actually within reach of anyone and can be done independently. Just pay attention to the following instructions. First, turn off the car and lift it with a standard hydraulic jack. Position yourself under the engine bay and unscrew the screws to easily remove the protective panel. At this point, place a container directly under the oil tank, remove the cap, and let all the used oil drain out. Once finished, refit the cap. Finally, replace the filter and fill the oil tank with the help of a funnel.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of a Ford C-Max?
Where is and how to reach the fuse box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) Today we will focus on identifying and reaching the fuse box of our Ford C Max. We start by opening the front passenger door. Then, we will need to b…
Where to find and how to access the fuse box of a Ford C-Max?
Where to find and how to access the fuse box of a Ford C-Max?
Ford C Max (2003-2010 / MK 1) The fuse box of your Ford C-Max is located beneath the glove compartment of the front passenger side. To access it, start by opening the front passen…
How to Replace the Key Battery on a Ford C-Max
How to Replace the Key Battery on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Start by inserting the tip of a thin but sturdy tool into the slot on the top side of the key fob for your Ford C-Max, then lever it open. Next, dise…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos