Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : How to replace the battery of the Ford C-MAX Hybrid?

Ford C Max - Video tutorial

Model: Ford C Max MK 2 - Years 2010-2019
Part: Battery
Operation: How to replace the battery of the Ford C-MAX Hybrid?

In this tutorial we can see how to replace the 12v battery in the Ford C-MAX Hybrid, located under the trunk. Let's start by opening the hatch and lifting the bottom panel. Next, we unscrew the 3 screws and the nut indicated and remove the entire plastic housing placed above the battery. At this point we can disconnect both terminals, always starting from the negative, detach the ventilation pipe and unscrew the single fixing bolt placed on the front side. We assemble the spare part following the reverse procedure, making sure to reconnect the positive pole first and obviously the ventilation pipe.


Posted on 27 April 2024 by ScegliAuto

    Frequently Asked Questions

    • C Max 2010-2019 - How do i replace the battery of the Ford C-Max? Read Answer
    • C Max 2003-2010 - What is the location of the Ford C Max battery? Read Answer
    • C Max 2010-2019 - How much is the battery for the Ford C-Max? Read Answer
    • C Max 2003-2010 - How much does it cost to replace the battery in a Ford C-Max? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos