Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Suspension on a Ford Endeavour?

Model: Ford Endeavour MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Suspension system

See other generations:
Video tutorial

To replace the suspension on a Ford Endeavour, lift the vehicle with a jack or lift so that the wheels are off the ground. Next, loosen the bolts securing the wheels so they can be removed from their housing.

Once the wheel is removed, loosen the bolts securing the suspension at the top and bottom, near the wheel hub. When the part is freed, remove it from its housing and replace it.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield of a Ford Endeavour
How to Replace the Windshield of a Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) This guide provides the main instructions on how to remove and replace the front windshield of a Ford Endeavour. First, get inside the vehicle and st…
How to Reset the AdBlue Warning Light on the Ford Endeavour?
How to Reset the AdBlue Warning Light on the Ford Endeavour?
Ford Endeavour (2016-2023 / MK 2) To reset the AdBlue warning light on the Ford Endeavour, you need to refill the tank with the necessary amount of fluid. Open the fuel door to locate…
How to Replace the Sync Multimedia System in the Ford Endeavour
How to Replace the Sync Multimedia System in the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) Today, in this short and simple guide, we will cover the main instructions on how to disassemble and replace the Sync 2 multimedia system with the Sy…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos