Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford C Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight bulb

In this mini guide, learn how to correctly and quickly replace the front indicator bulb on a 2013 Ford C Max. First, completely switch off the car and lift the bonnet. Using a T30 spanner, remove all the side screws securing the headlamp that requires bulb replacement. Remove the headlamp and disconnect the electrical connector. Next, remove the protective cap, unscrew the two screws holding the bulb in place, and proceed with replacing the bulb. Finally, reassemble everything correctly to complete the task.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Light Bulb on the Ford C-Max?
How to Replace the Front Light Bulb on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the front light bulb on the Ford C-Max, open the bonnet to access the top of the light: here you will find the screws to loosen, which wil…
Replacing the front headlight bulb on the Ford C-Max MK2
Replacing the front headlight bulb on the Ford C-Max MK2
Ford C Max (2010-2019 / MK 2) In this video, we will see the procedure to remove and replace the front headlight bulb on the Ford C-Max second series, from 2014, in simple steps. …
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos