Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses on a Ford Kuga?

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Fuse box

The fuses on the Ford Kuga are located inside the dedicated fuse boxes within the car. This model has two: the first is inside the cabin and the second is in the engine compartment. The first is located at the rear of the glove compartment on the passenger side, which must be removed to allow access. The second fuse box is located in the engine compartment, on its side. To know the function of each fuse and its amperage, check the vehicle's user and maintenance manual.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses in the 2015 Ford Kuga
Where to Find the Fuses in the 2015 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Inside the 2015 Ford Kuga II model, there are two fuse boxes. The first fuse box is located under the front bonnet next to the battery. Inside, you w…
Where to Find the Fuses in the 2013 Ford Kuga
Where to Find the Fuses in the 2013 Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) The 2013 Ford Kuga has two fuse boxes. The first fuse box is located under the front bonnet next to the battery; inside, in addition to medium ampera…
Where Are the Fuses Located in the Ford Kuga?
Where Are the Fuses Located in the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) The fuses in the Ford Kuga are divided between two fuse boxes located within the vehicle: the first is found in the engine bay, protected by a specif…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos