Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the horn fuse located in the Ford Fusion?

Model: Ford Fusion MK 1 - Years 2002-2012
Part: Fuse box

If the horn stops working, the first thing to check is the condition of its fuse. The Ford Fusion has 2 fuses related to the horn, and you can see their location in the attached video. The fuse box is located behind the passenger glove compartment, so first remove the drawer. The relevant fuses are the two labelled F27, one rated at 10A and the other at 15A. To replace them, obviously with fuses of equivalent amperage, simply pull them out with pliers and insert the replacement in either direction.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse for the radio of the 2007 Ford Fusion located?
Where is the fuse for the radio of the 2007 Ford Fusion located?
Ford Fusion (2002-2012 / MK 1) The fuse of the 2007 Ford Fusion's radio is located inside the fuse box inside the cabin, specifically under the dashboard on the driver's side. The …
Where are the fuses located in the Ford Fusion?
Where are the fuses located in the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) All the fuses of the Ford Fusion are located inside the only fuse box installed in the vehicle: this will be found inside the cabin. To locate it, yo…
Replacing the Horns on Ford Fusion
Replacing the Horns on Ford Fusion
Ford Fusion (2002-2012 / MK 1) On the Ford Fusion, the manufacturer has positioned the horns behind the windscreen washer reservoir and near (in front of) the front passenger wheel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos