Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fusion
    4. : Replacement of horn horns on Ford Fusion

Ford Fusion - Video tutorial

Model: Ford Fusion MK 1 - Years 2002-2012
Operation: Replacement of horn horns on Ford Fusion

On the Ford Fusion the builder has placed horn horns behind the washer fluid reservoir and in proximity (in front) of the front wheel to the passenger side. To remove them you will then have to remove the front bumper, unscrew the bolts and disconnect the connector. The video shows you how and where it is possible to mount additional horns to the original ones, in case you want an "upgrade" in this sense. Otherwise, just remove the original horns and mount the ones you bought, which must obviously be compatible with this car model.


Posted on 15 February 2024 by ScegliAuto



Where is the horn fuse located in the Ford Fusion?
Ford Fusion (2002-2012 / MK 1) In case the horn stops working, the first thing to check as usual is the state of the relevant fuse. In the Ford Fusion there are 2 fuses related to
Fuse diagram of the 2012 Ford Fusion.
Ford Fusion (2002-2012 / MK 1) In this video, the correct location of the fuse boxes for the Ford Fusion is shown. Additionally, their assignment and power are displayed in order t
How to know the fuse diagram of a Ford Fusion
Ford Fusion (2002-2012 / MK 1) In this tutorial we can see the diagram related to the fuses present in a Ford Fusion car. The first fuse box is located inside the vehicle's cabin a

    Frequently Asked Questions

    • Fusion 2002-2012 - Where do i find the car radio unlock code in a Ford Fusion? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos