Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Full Service on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years 2014-2021
Part: Checks and maintenance

In this video tutorial, you can see how to perform a full service on a Ford Mondeo. First, lift the car using a hydraulic lift. Once the car is lifted, remove the undertray by unscrewing the bolts with an Allen key. After removing the undertray, you will have access to the oil filter and the oil drain plug; remove the plug to drain the oil into a container. Once all the oil has drained, replace the plug and use the appropriate tool to unscrew the oil filter; once removed, replace it with a new one. The next step is to refit the undertray. At this point, lower the car and proceed to unscrew the fuel filter and replace it; then remove the metal cover located above the filter.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on a Ford Mondeo
Resetting the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) When it's time for a service on the Ford Mondeo, a message will appear on the dashboard to alert you. After completing all tasks outlined in the main…
How to Reset the Service Light on a Ford Mondeo
How to Reset the Service Light on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) This video tutorial shows how to reset the oil maintenance light on a Ford Mondeo, produced from 2014 to 2021. This operation should be performed eac…
Removing Antenna from Ford Mondeo
Removing Antenna from Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) To remove the antenna from the roof of a Ford Mondeo, start by removing the interior light from the roof cover panel. Pull the light out of the panel…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos