Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on a Ford Mondeo

Model: Ford Mondeo / Fusion MK 4 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, you will see how to perform the service reset on a Ford Mondeo. By following simple steps, you can reset the service light: First, carry out vehicle maintenance such as changing the engine oil and filters; after completing the DIY service, get in the car and engage the handbrake.

Press the brake and accelerator pedals fully down while simultaneously holding the start button for about 10 seconds; at this point, the message to reset (Service: Oil reset complete) should appear, then select OK to confirm the reset. Reset completed!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2012 Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) To reset the service light on a 2012 Ford Mondeo, do the following: -turn on the ignition; -press the OK button on the steering wheel; -select the se…
How to Reset the Service on Ford Mondeo
How to Reset the Service on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) To reset the service maintenance on Ford Mondeo, enter the vehicle and turn on the instrument panel (using the appropriate ignition button). Press th…
How to Reset the Oil Service on the Ford Mondeo?
How to Reset the Oil Service on the Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) As you can see in this tutorial, resetting the oil service on the Ford Mondeo is an extremely simple and quick operation. Before proceeding, ensure t…

Other guides you may be interested in

    Frequently Asked Questions

    • Mondeo 2007-2014 - How to reset the inertia switch of the Ford Mondeo? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos