Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Ford Mondeo / Fusion MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

Lift the car and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool, and a large container for collecting the oil. Position the container under the engine to collect the oil. Unscrew the oil cap on the sump and allow it to drain.

Use the special tool to unscrew the filter and remove the cartridge. Replace the used filter cartridge with a new one and refit the filter.

Also, replace the copper washer on the oil cap and that of the filter. Close the oil cap, refit the oil filter, and top up with new oil, checking the level with the dipstick.

Reset the onboard computer for the next change. Do not dispose of used oil in the environment; take it to appropriate collection centres.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Ford Mondeo / Fusion (2007-2014 / MK 3) Lift the car and secure it with appropriate supports so it cannot fall. The necessary tools are a ratchet spanner, a set of fixed spanners, a special…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Ford Mondeo / Fusion (2000-2007 / MK 2) Lift the vehicle and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet, a set of spanners, a special …
How to Perform the Service Reset on a Ford Mondeo
How to Perform the Service Reset on a Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this video tutorial, you will see how to perform the service reset on a Ford Mondeo. By following simple steps, you can reset the service light: F…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos