Engine Oil and Oil Filter Replacement

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:

This video is currently unavailable

Lift the car and secure it with appropriate supports so it cannot fall. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool, and a large bowl for collecting the oil. Position the bowl under the engine to collect the oil. Unscrew the oil cap on the sump and allow it to drain.

Using the special tool, unscrew the filter and remove the cartridge. Replace the used filter cartridge with a new one and reassemble the filter.

Also, replace the copper washer on the oil cap and that of the filter. Close the oil cap, reassemble the oil filter, and top up with new oil, checking the level with the dipstick.

Reset the onboard computer for the next change. Do not dispose of used oil in the environment; take it to the appropriate collection centres.

Updated on 5 February 2026 by ScegliAuto

Other guides you may be interested in

Oil Filter - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!

by ScegliAuto

Engine Oil and Oil Filter Replacement

Related tutorials

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

More videos