Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Kuga
    4. : How to change the reverse light bulb on Ford Kuga?

Ford Kuga - Video tutorial

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Rear light bulb
Operation: How to change the reverse light bulb on Ford Kuga?

If we want to proceed with replacing the reverse light bulb on this car in do-it-yourself mode, we can follow the instructions below and also help us with the images of the video tutorial. The first thing to do is open the tailgate, unhook the plastic molding of the tailgate opening handle and under it we will find two screws that need to be unscrewed to remove the handle. Then proceed to release the fixing clips of the panel located behind the lock. Then identify the optical unit in which to replace the lamp and unscrew the fixing wing nut located behind it. In this way we can extract the headlight and proceed with the replacement of the bulb.


Posted on 17 May 2024 by ScegliAuto



How to change headlight bulb on Ford Kuga 1
Ford Kuga (2008-2012 / MK 1, C394) In this guide, let's see how to disassemble and replace the front light bulbs of the first series Ford Kuga, by following these simple steps. First o
Ford Kuga rear light bulb replacement
Ford Kuga (2012-2019 / C520, MK 2) In today's video tutorial we will see how to change the rear light bulb of a Ford Kuga. First of all we open the tailgate of the trunk and equip ours
Removing the Ford Kuga rear light bulb
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial we will see how to remove, in simple steps and without any type of tool, the rear light bulb of a Ford Kuga. First of all we o

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos