Do it yourself
Frequently asked questions about cars and motorcycles

Removal of Driver's Door Panel

Model: Ford Ka MK 1 - Years 1996-2008
Part: Door trim panel

This video illustrates step by step how to remove the driver's door panel of your car. Once the door is open, start removing all the caps covering the screws of the panel; after removing the cover caps, unscrew the screws and take them out. Then, gently remove the door handle, being careful of the connected connector. Once the handle is removed, unscrew the last remaining screw and carefully apply slight pressure to the sides of the panel, detaching it gradually from the door.

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Ka (1996-2008 / MK 1) How to remove the driver's door panel of a Ford Ka? This video explains how to proceed. Before starting the disassembly work, disconnect the battery …
Ford Ka (2008-2016 / MK 2) In this video tutorial, you will learn how to remove the rear seats and the front door panel on a Ford Ka second series. To remove the rear seats, un…
Ford Ka (1996-2008 / MK 1) How to remove the door panel on a Ford Ka Cabrio? This video explains how to proceed. Before starting the disassembly work, disconnect the battery te…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos