Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Ford Escape cabin air filter

Model: Ford Escape MK 2 - Years 2008-2012
Part: Cabin air filter

In today's video we will see how to remove and replace the Ford Escape cabin air filter, following the instructions below. First of all, we open the bonnet of our car and start unscrewing the fixing screws of the plastic bulkhead that we find at the top left, using a Phillips screwdriver; then we remove the plastic clips to access the pollen filter box, as shown in the video. At this point we remove the passenger compartment air filter and replace it with the new one; let's insert it in the correct direction and reassemble everything!

Posted on 23 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Ford Escape?
How to replace the cabin filter in the Ford Escape?
Ford Escape (2013-2019 / MK 3) In this video we can see how to replace the cabin air filter in the Ford Escape, a very simple and fast operation. The filter is positioned in the co…
Ford Escape Pollen Filter Replacement
Ford Escape Pollen Filter Replacement
Ford Escape (2001-2007 / MK 1) .. this short and simple guide, how to remove and replace the Ford Escape cabin air filter. First of all we open the bonnet and begin to disassemble the.. …
How to replace the cabin filter in the Ford Escape?
How to replace the cabin filter in the Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial we can see how to replace the cabin filter in the Ford Escape, a very simple and fast operation. The filter is located inside the en…

Other guides you may be interested in

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos