Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Ford Escape

Model: Ford Escape MK 1 - Years 2001-2007
Part: Cabin air filter

Today, you will learn in this brief and simple guide how to remove and replace the cabin air filter on the Ford Escape. First, open the hood and start removing the plastic cover located under the windshield by unscrewing all the mounting screws. Underneath, at the upper left of the engine compartment, you will find the cabin air filter, as shown in the video. At this point, remove any dirt present next to the filter. Insert the new cabin air filter in the correct orientation, following the video tutorial until the end!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on the Ford Escape
Replacing the Cabin Air Filter on the Ford Escape
Ford Escape (2008-2012 / MK 2) In today's video, we will see how to remove and replace the cabin air filter on the Ford Escape, following the instructions below. First, open the ho…
Replacing the Air Filter of the Ford Escape
Replacing the Air Filter of the Ford Escape
Ford Escape (2008-2012 / MK 2) In this video tutorial, see how to remove and replace the engine air filter of the Ford Escape V6 in simple and quick steps. First, open the hood and…
How to Replace the Air Filter on a Ford Escape
How to Replace the Air Filter on a Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the air filter on a Ford Escape, open the hood and locate the air filter box on the right side of the engine compartment. To open the box,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos