Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Rocker Cover Gasket

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Engine

See other generations:
Video tutorial

Once you have removed the rocker cover and taken off the old gasket, clean both the gasket seat under the cover and the contact surface on the cylinder head thoroughly. After cleaning, apply the new gasket into the groove along the edges of the cover, ensuring it fits properly; then, reposition the cover on the cylinder head and tighten the fixing bolts using a torque wrench.

Generally, it is not necessary to apply gasket sealant, but if the edges of the cover or the surface of the cylinder head appear uneven, it may be advisable to apply sealant.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) In today's video, you will see instructions for removing and replacing the rocker cover gasket on a second-generation Ford Focus 1.6 TDCi. First, ope…
Ford Focus (2004-2011 / MK 2, Focus 2) It is essential, before installing the new gasket, to clean the seating area thoroughly, both on the cover side and the head side; in this particular…
Ford Focus (2004-2011 / MK 2, Focus 2) Start by checking for any warping of the cylinder head surface using a straight edge and a feeler gauge; repeat the same check on the cylinder block;…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos