Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Replacing the tappet cover gasket

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine
Operation: Replacing the tappet cover gasket

Before installing the new gasket, it is essential to carefully clean the relative seat, both on the cover side and on the head side; in this model in particular, the valve cover has a groove along its contour inside which the gasket is inserted: therefore make sure that the gasket adheres perfectly to the edges of the groove, then position the cover complete with gasket on the cylinder head and tighten the fastening pins with the torque wrench, making sure of perfect adherence and checking that the gasket does not come out of its seat.


Posted on 6 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - What problem does the Ford 1.6 115CV engine present? Read Answer
    • Focus 2011-2018 - What problems does the Ford Focus Ecoboost engine have? Read Answer
    • Focus 2011-2018 - Why does the engine failure warning light come on in the Ford Focus? Read Answer
    • Focus 2011-2018 - Why does the Ford Focus Start & Stop not work? Read Answer
    • Focus 2004-2011 - What are the problems with the Ford Focus 1.6 TDCI engine? Read Answer
    • Focus 2011-2018 - What is wrong with the Ford Focus 1.6 TDCI engine? Read Answer
    • Focus 2011-2018 - What problems on Ford Focus tdci? Read Answer
    • Focus 2018-2025 - What to do if the Ford Focus has an engine problem? Read Answer
    • Focus 2011-2018 - Where is the engine speed sensor located in a Ford Focus? Read Answer
    • Focus 2011-2018 - Engine failure warning light on Ford Focus, what to do? Read Answer
    • Focus 2011-2018 - How many mounts does the engine have on Ford Focus? Read Answer
    • Focus 2004-2011 - How many miles can a Ford Focus travel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos