Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse Box Located in the Ford Escape

Model: Ford Escape MK 4 - Years 2020-2026
Part: Fuse box

Finding the fuse box in your car is very simple and does not require any mechanical expertise. Before performing the following steps, remember that it is essential to turn off the engine and disconnect the battery to ensure maximum safety. Position yourself on the driver's side and locate the small latch that unlocks the hood. It is located on the lower left side. At this point, exit the car and lift the hood. Insert the safety rod. Locate the battery, and just to its right, you will notice a plastic box with a lightning bolt symbol on it. This is your fuse box. Press the center clip to remove the top cover and then the side clips to lift it. Open it, and you have full access to the fuses.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Ford Escape 2006 located?
Where is the fuse box of the Ford Escape 2006 located?
Ford Escape (2001-2007 / MK 1) In this new guide of ours, we will discover where the fuse box is located in your first generation Ford Escape (year 2006). First of all, the car mus…
Where is the fuse box located in the Ford Escape?
Where is the fuse box located in the Ford Escape?
Ford Escape (2020-2026 / MK 4) The 2020 Ford Escape has two fuse boxes inside. To access the first fuse box, you need to open the front hood and remove the fuse box located inside …
Where is the fuse box of the engine of the 2024 Ford Escape located?
Where is the fuse box of the engine of the 2024 Ford Escape located?
Ford Escape (2020-2026 / MK 4) If you want to find out where the fuse box of the engine of your new 2024 Ford Escape is located, all you have to do is read the following guide and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos