Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Ford Transit?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Brake pads

To replace the front brake pads of the Ford Transit, lift the vehicle so that the corresponding wheel is off the ground. Loosen all the relevant bolts to remove the wheel, granting access to the brake caliper. Lift the caliper by removing the pin at the bottom, and disconnect the wear sensor of the pads. At this point, the old pads can be extracted from their housing and replaced with new spare parts. After replacement, reassemble all other components.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Brake Pads on a Ford Transit
Removing Front Brake Pads on a Ford Transit
Ford Transit (2006-2014 / MK 7) Are the front brake pads worn? Let's look at removing the pads from the brake caliper on the Transit. Remove the wheel (using a socket spanner or air…
How to Replace the Front Brake Pads on a Ford Transit Connect
How to Replace the Front Brake Pads on a Ford Transit Connect
Ford Transit (2000-2006 / MK 6) In this brief and simple guide, follow the instructions to remove and replace the front brake pads on a Ford Transit Connect. First, lift the vehicle…
Replacing the Brake Pads on a Ford Transit
Replacing the Brake Pads on a Ford Transit
Ford Transit (2014-2024 / MK 8) Are the rear brake pads on your Ford Transit worn? Here’s how to remove them. Lift the vehicle on a column lift to the desired height, then remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos