Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to synchronize your mobile device with the Ford Escape.

Ford Escape - Video tutorial

Model: Ford Escape MK 2 - Years 2008-2012
Part: -board computer
Operation: How to synchronize your mobile device with the Ford Escape.

As you should do whenever you want to perform a maintenance operation on a car, we place our Ford Escape on a plane (well immobilized) or on the deck to protect the operator's safety. Now, turn on the Bluetooth connection on the device and press the second button (for voice communication), from the bottom, which we find on the steering wheel and let's say, to the on-board computer that we want to connect to the phone. At this point, just follow the voice instructions and give "OK" when prompted. The car then sends a PIN code to the phone which we must enter when we choose the Bluetooth device to connect to. When we give the ok, the on-board computer confirms that the operation has taken place.


Posted on 14 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos