Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on the Ford Transit Van?

Model: Ford Transit MK 8 - Years 2014-2024
Part: Door trim panel

In this guide, you will see how to remove the rear door panel on the Ford Transit van. First, remove the upper frame section by unfastening the internal clips, then take off the centre part, the emergency handle, and the edge of the lock button cover. Since the main panel is also clipped in, start unfastening the internal clips from the upper area, using a screwdriver or a plastic spatula if necessary. Once fully unclipped, pull the emergency handle cable out through the hole.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on the Ford Transit Van
How to Replace the Rear Lights on the Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the rear lights on the Ford Transit van, a very simple and quick operation. First, ensure that the instr…
How to Replace the Sliding Door Handle on a Ford Transit Van
Ford Transit (2014-2024 / MK 8) In this tutorial, we will see how to replace the sliding door handle on a Ford Transit van, a very simple and quick operation. First, open the door i…
How to adjust the side door on the Ford Transit van?
How to adjust the side door on the Ford Transit van?
Ford Transit (2014-2024 / MK 8) In this tutorial we can see how to adjust the side door on the Ford Transit van, a very simple and quick operation. First of all, we open the door it…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos