Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of the Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Headlight

In this video, see how to remove the front headlamp of the Ford Fiesta MK7, a very simple task. First, remove the plastic cap indicated using a screwdriver, then unscrew the screw beneath it and the opposite one. At this point, disconnect the rear power connector and pull the headlamp out of the housing by lifting it upwards. For the driver’s side headlamp, you can create more space if needed by removing the upper tube of the windscreen washer reservoir. If you need to replace a bulb, simply open the headlamp cap, disconnect the connector, and remove the bulb holder.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of a Ford Fiesta
How to Remove the Front Headlamp of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To remove the front headlamp of a Ford Fiesta, open the bonnet to access the screws securing the headlamp from the top: these will be located at the …
How to Install the LED Bulb in the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
How to Change Bulbs on Ford Fiesta
How to Change Bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securin…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos