Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Key Battery of the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Key

The video shows how to replace the battery in the remote key of the Ford Fiesta. First, extend the manual key blade and then pull the ends of the remote to separate the two parts. The battery is located in the half without the blade. Open the casing using the blade as a lever to separate the two parts. This allows access to the battery, which you can remove from its housing and replace with a new one. Finally, simply close the remote casing and reassemble the two parts.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Ford Fiesta?
How to Replace the Remote Battery of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To replace the battery of the Ford Fiesta, use a tool to pry off the cover on the back of the remote, allowing you to remove the emergency key inside…
How to replace the remote battery of the Ford Fiesta?
How to replace the remote battery of the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the battery of the remote for the Ford Fiesta, press the two side tabs to lift the front cover. Removing it will allow you to extract the …
How to Replace the Remote Battery in a Ford Fiesta
How to Replace the Remote Battery in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, we will see how to replace the dead battery in a Ford Fiesta remote. Start by removing the plastic cover on the back. Now extract t…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos