Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lower Front Headlamp on the Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight

In this tutorial, we will see how to remove the lower front headlamp on the Ford Kuga, so you can replace, for example, the side indicator bulb or the fog light. To do this, you will only need a set of screwdrivers and, of course, the correct replacement parts. First, ensure that the key is not inserted, then pry off the outer plastic trim using a flat-head screwdriver. Next, unscrew the two fixing screws of the headlamp, then pull it towards you and remove it from the bumper. Finally, remove the bulbs by turning them counterclockwise and proceed with replacing the damaged component.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light from a Ford Kuga
How to Remove the Fog Light from a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Before you begin, exit the cabin and head to the front of your Ford Kuga. Using a small flathead screwdriver as a lever, start by prising off and rem…
Removing the Front Fog Light on a Ford Kuga
Removing the Front Fog Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video, we see the instructions on how to remove the front fog light on a Ford Kuga, both first and second series, by following these simple s…
How to Remove the Front Headlight on a Ford Kuga
How to Remove the Front Headlight on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) This guide provides instructions to remove and replace the front headlight on a Ford Kuga in simple steps. First, open the bonnet of the vehicle and …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos