Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Ford Focus Mk3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Battery

This guide shows how to replace the battery on the Ford Focus Mk3. First, disconnect the negative terminal connector from the left front suspension and isolate it to prevent any contact. Remove the engine air filter box by disconnecting the electrical cables and the hose. Detach the battery cover, the positive terminal, and the electrical connectors on the side. Remove the battery hold-down bracket. Disconnect the negative terminal and attach it to the new battery. Position the new battery in place and reconnect all the disconnected parts. Check the battery's proper functioning before hitting the road.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Ford Focus
How to Replace the Key Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by inserting a thin but sturdy tool into the slot on the side of your Ford Focus key to pry it open. Next, you will need to unclip and remove t…
How to Replace the Car Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Replacing the battery on a Ford Focus? Let's look at removing the old battery located in the engine bay. Open and lift the front bonnet by releasing …
How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) When the remote for your Ford Focus stops working, the cause is almost always a flat battery. To replace the remote battery of a Ford Focus, you must…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos