Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Front License Plate on a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019

Follow this brief guide to install the license plate holder and front license plate on your Ford Escape. First, move to the front of your vehicle and start drilling holes in the front bumper, using the license plate holder as a reference; drill the holes after taking accurate measurements. Next, secure the license plate holder and then install the license plate using rivets; make sure to secure it properly to avoid losing it while driving!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to temporarily install the license plate and license plate holder of the Ford Escape
How to temporarily install the license plate and license plate holder of the Ford Escape
Ford Escape (2020-2026 / MK 4) These short and simple instructions will guide us on how to install the license plate and license plate holder of the Ford Escape, using a temporary …
How to Remove the Front Door of the Ford Escape
How to Remove the Front Door of the Ford Escape
Ford Escape (2001-2007 / MK 1) This brief guide explains how to remove and replace the front door of the first-generation Ford Escape. First, open the front door and start by detac…
Disassembly of the front door panel of the Ford Escape
Disassembly of the front door panel of the Ford Escape
Ford Escape (2020-2026 / MK 4) In this short guide, we will see step-by-step instructions that will allow us to disassemble and replace the front door panel of the Ford Escape. Fir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos