Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Automatic Shift Knob on the Ford Fusion Mk2

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Shift knob

This guide shows how to replace the automatic shift knob on the Ford Fusion Mk2. The first step is to remove the trim cover at the base of the shifter and the rear edge of the center console. Lift the leather trim cone to access the screws securing the knob. At this point, there are two screws at the base of the knob; unscrew these and remove the piece. Disconnect the electrical connectors for the lighting and the shift button. After installing the new part, tighten the screws in place and reconnect the control wiring. Check the proper operation of the shift lever.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear shift knob in the Ford Fusion?
How to replace the gear shift knob in the Ford Fusion?
Ford Fusion North America (2006-2012 / MK 1) In this tutorial we can see how to replace the gear knob in the Ford Fusion, an extremely simple and fast operation. First of all, let's go inside th…
How to Unlock the Automatic Transmission in a Ford Fusion?
How to Unlock the Automatic Transmission in a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to unlock the automatic transmission in a Ford Fusion, an emergency operation to perform if the battery is dead an…
How to Replace the Exterior Door Handle on the Ford Fusion North America
How to Replace the Exterior Door Handle on the Ford Fusion North America
Ford Fusion North America (2006-2012 / MK 1) In this brief and simple guide, discover how to remove and replace the exterior door handle on the front door of the Ford Fusion North America. First…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos