Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear shift knob in the Ford Fusion?

Model: Ford Fusion North America MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

In this tutorial we can see how to replace the gear knob in the Ford Fusion, an extremely simple and fast operation. First of all, let's go inside the cockpit, then insert a screwdriver with a flat tip into the indicated slot, lever and detach the lower cover of the knob.

We then unscrew the two screws just released using a Torx T20 key, grab the knob and separate it from the shaft by pulling it upwards. At this point, all that remains is to insert the replacement and reassemble everything simply by following the reverse procedure.


Posted on 15 December 2024 by ScegliAuto


Related tutorials

How to Replace the Shift Cable on a Ford Fusion
How to Replace the Shift Cable on a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) This guide provides the main instructions to remove and replace the shift cable on a Ford Fusion. First, open the hood and locate the transmission ca…
How to Replace the Automatic Shift Knob on the Ford Fusion Mk2
How to Replace the Automatic Shift Knob on the Ford Fusion Mk2
Ford Fusion North America (2013-2020 / MK 2) This guide shows how to replace the automatic shift knob on the Ford Fusion Mk2. The first step is to remove the trim cover at the base of the shifte…
How to Unlock the Automatic Transmission in a Ford Fusion?
How to Unlock the Automatic Transmission in a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to unlock the automatic transmission in a Ford Fusion, an emergency operation to perform if the battery is dead an…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos