Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide on How to Stop Oil Leaks from Your Car

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Checks and maintenance

See other generations:
Video tutorial

The following guide shows how to stop oil leaks in your vehicle. Since this operation can be messy, it is advisable to wear gloves, a work suit, and perhaps cover the floor with a plastic sheet.

If there are leaks, simply tighten the screws and bolts of the gaskets to prevent oil from flowing, but do not overtighten to avoid deforming the gasket. If leaks persist, you will need to replace the gasket, a delicate operation best performed by a trusted mechanic to avoid causing any damage.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor
Replacing the Starter Motor
Ford Mondeo / Fusion (1993-2000 / MK 1) The starter motor is a crucial electrical component that allows you to start your car. If your car won't start, one possible cause could be a faulty …
Replacing the Suspension Arm
Replacing the Suspension Arm
Ford Mondeo / Fusion (1993-2000 / MK 1) The suspension arm of the car ensures the connection between the chassis and the struts. Replacing it is not a very complicated job and can be done i…
How to reset the tire pressure warning on the Ford Mondeo
How to reset the tire pressure warning on the Ford Mondeo
Ford Mondeo / Fusion (2014-2021 / MK 4) In this guide we will see the procedure for resetting the tire pressure warning on the Ford Mondeo; before resetting the TPMS sensors, it is necessar…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos