Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Suspension Arm

Model: Ford Mondeo / Fusion MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Control arm

See other generations:
Video tutorial

The suspension arm of the car ensures the connection between the chassis and the struts. Replacing it is not a very complicated job and can be done independently, saving some money.

The following guide explains how to replace it. You will need a jack and a spanner. Identify the arm to be replaced and lift the car to work safely.

Then, unscrew the bolts with the appropriate spanner and remove the wheel from the hub. Next, disconnect the stabiliser link from the arm, using the spanner. Once the suspension joint is removed, you will have the arm in front of you to remove.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Shock Springs
Replacing Rear Shock Springs
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the rear suspension springs, lift the vehicle on a ramp and remove the rear wheel. Then, detach the link connecting the suspension wishbon…
Replacing Front Hub Bearing
Replacing Front Hub Bearing
Ford Mondeo / Fusion (1993-2000 / MK 1) To replace the front hub bearing directly on the vehicle, you need specific tools; lift the vehicle on suitable axle stands, remove the front wheel (…
Replacing Front Hub Bearing
Replacing Front Hub Bearing
Ford Mondeo / Fusion (1993-2000 / MK 1) Before lifting the vehicle, loosen the central nut that secures the driveshaft to the hub and the wheel fixing bolts; then lift the car and place it …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos