Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Shock Springs

Model: Ford Mondeo / Fusion MK 2 - Years 2000-2007
Part: Suspension system

To replace the rear suspension springs, lift the vehicle on a ramp and remove the rear wheel. Then, detach the link connecting the suspension wishbone to the stabiliser bar. Place a jack under the rear hub to remove the mounting bolt of the wishbone from the hub support, allowing you to lower the suspension enough to extract the spring. Insert the new spring and reattach the mounting bolt of the wishbone and the link.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Drums and Shoes
Replacing Rear Drums and Shoes
Ford Mondeo / Fusion (1993-2000 / MK 1) Lift and secure the vehicle on appropriate axle stands and remove the rear wheel without engaging the handbrake. Remove the drum retaining nuts from …
Replacing Rear Brake Pads on Ford Mondeo
Replacing Rear Brake Pads on Ford Mondeo
Ford Mondeo / Fusion (1993-2000 / MK 1) In today's tutorial video, you will learn how to remove and replace the rear brake pads on a Ford Mondeo. First, remove the rear wheel by unscrewing …
Replacing the Rear Brake Pads of the Ford Mondeo
Replacing the Rear Brake Pads of the Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Today, let's discover the instructions and procedure to remove and replace the rear brake pads of the Ford Mondeo in simple steps. First, lift the ve…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos