Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor

Model: Ford Mondeo / Fusion MK 1 - Years 1993-2000
Part: Starter motor

The starter motor is a crucial electrical component that allows you to start your car. If your car won't start, one possible cause could be a faulty starter motor. This guide shows you how to replace the starter motor without needing to rely on a mechanic. First, open the bonnet and disconnect the negative terminal of the battery, then locate the exact position of the starter motor. Next, lift the car with a jack and identify all the connections of the starter motor, removing all the mounting points. At this point, you can remove the starter motor from your car.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on a Ford Mondeo
Replacing the Starter Motor on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Is the starter motor damaged and you don't know how to remove it? Here's how to take it off a Mondeo. Disconnect the battery power cables. Remove the…
Instructions for Replacing the Starter Motor
Instructions for Replacing the Starter Motor
Ford Mondeo / Fusion (1993-2000 / MK 1) Before proceeding with the removal of the starter motor, disconnect the battery to avoid any short circuits. To access the starter motor, located abo…
Check Starter Motor Function
Check Starter Motor Function
Ford Mondeo / Fusion (2000-2007 / MK 2) Once you have removed the starter motor and secured it in a vice, you can check its function using a battery. In any case, once disassembled, it is a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos