Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Explorer
    4. : How do I top up the Ford Explorer with coolant?

Ford Explorer - Video tutorial

Model: Ford Explorer U502, MK 5 - Years 2011-2019
Part: Antifreeze liquid
Operation: How do I top up the Ford Explorer with coolant?

To be able to top up the Ford Explorer coolant, press the lever under the steering column, which will allow you to unlock the front hood. In this way, the latter will have to be raised and fixed by its rod. At this point, you will have to unscrew the fuel cap located at the top left, immediately under the windshield on the passenger side. By removing the cap it will be possible to pour in the new liquid and check the level inside the tank. After adding the new liquid, it will be possible to screw the cap to close the tank.


Posted on 9 September 2022 by ScegliAuto



Fuse diagram of a Ford Explorer
Ford Explorer (2002-2005 / MK 3, U152) If on your third generation Ford Explorer you have encountered one or more malfunctions related to the fuses, you are in the right place! Because tha
Replace the Ford Explorer bonnet hydraulic pistons
Ford Explorer (2006-2010 / MK 4, U251) In this short and simple guide, let's see the instructions on how to disassemble and replace the pistons of the Ford Explorer bonnet. First of all, w
How to attach the Explorer logo on the Ford Explorer front hood
Ford Explorer (2011-2019 / U502, MK 5) In this video we will show you how to stick the Explorer logo on the front hood of the Ford Explorer. Thoroughly clean the surface on which you inten

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos